Planes
 

Extreme Flight Yak 54e

 47.5" Wingspan
Hacker A30-14L Outrunner Motor
Castle Creations Pheonix 45
Xoar 14x7 Beachwood Prop
Hitec HS65 kryptonite all around
JR R700 Receiver

 

 

3D Foamy Advantage Bipe

  


 

..3DFoamy VTO(50%) (home-made from plans)...

15" wingspan
4 Channel
Fully Aerobatic, 3D
5.5oz's AUW

22 turn CD-rom Brushless
Castle Creations Pheonix 10
9X4.7 APC SF Prop
GWS Pico 4 channel
3 GWS Pico servos
built out of 6mm depron

...3DFoamy Edge 540 (home-made from plans)...

39" Wingspan
5 Channel
Fully Aerobatic, 3D
11.3oz's AUW

Himax 2015-4100 Brushless
Castle Creations Pheonix 10
GWS EPS-300C/D Gearbox (5.5:1)
12x6 GWS SF Prop
GWS Naro 6 channel
4 GWS Pico+ BB servos
built out of 6mm depron

10 minute flight video (40MB's)


Click to make them BIG

 

...Homebuilt Speed Stick...
Now running a 20 turn CD-Rom motor

30" Wingspan
3 Channel
Warm-liner, pylon racer
6.3oz's AUW

20 turn CD-Rom motor (not in pic)
GWS ICS-300
4.5x3 GWS SF Prop
GWS Pico 4 channel
2 Expert SL110 servos
built out of .25" Carbon Rod, 1/16" sheet Balsa, and a Salvaged Sporty wing
 


Click to make them BIG


....GWMP E3D....

48" Wingspan
5 Channel
Fully Aerobatic, 3D
53oz's AUW

Hacker Brushless C-40
Hacker Master 70-3p OPTO Controller
MEC Superbox 5:1 (60/12)
Thunder Power 3S4P 7800mah Lipo
14x7 APC-E Prop
JR R700
UBEC
2 Hitec HS-85MG (rudder and elevator)
2 Hitec HS-85BB (ailerons)
Carbon fiber Landing Gear
Dave Brown Aluminum Spinner
Covered with Ultracote

See a video of the first flight
16.5 MB's, Windows Media


Click to make them BIG

Get more information about this kit at www.gwmp.net


... Stevens Aero Micro Cap 232 ...

24" Wingspan
4 Channel
Fully Aerobatic, TOC style
6oz's AUW

Feigao 12mm Brushless 5300kv
GWS LPS gearbox
Castle Creations Pheonix 10
Irate 2S 600mah 10C Lipo
GWS R4P Receiver
3 GWS Pico servos
Castle Creations Pheonix 10

Covered with Nelson Lite Film
Using Dubro Lite Wheels
Dubro Micro Tail Wheel
Dubro Micro Pull-Pull Setup

Custom Graphics Created by me


click to make them BIG

 

  

I have to give them credit for an awesome, lightweight kit.  All parts are Laser cut, making them interlocking,
which makes this kit very easy to build, and also very quick.

for more info on the kit, go to www.stevensaero.com

-----------------------------------------------------------

30" Foamy Factory Ultimate Bipe (home-made from plans)

GWS EPS350D Power System
GWS 12x6 SF prop
Kokam 2S 1500HD
GWS Pico BB Servo's
11.5oz's AUW

-----------------------------------------------------------
36" Foamtana's (home-made from plans)

These planes fly great.. Made out of Depron foam.  Powered by a GWS300D, or GWS 350D power system.
the planes are perfect for practicing 3D maneuvers.